Here we have projected our plans as well as our successful work till now to guide our users with automation ideas that we promise to complete it at affordable cost.
01
Water tank Automation
For one of our customer we completed complete water tank automation, below are the conditions:
- Control Water tank motor: Turns ON when Water level is below 60%, Turns OFF when Water level is above 95%.
- Motor timer: Motor will only turn ON in between 6:00 AM to 8:30 AM as Municipal water supply was limited to this time period.
- Prevent Motor dry run: Continuously monitor water flow and if water supply stop, Motor will stop immediately to prevent dry run of motor.
- Prevent overflow: This is Fail-proof design only in case of water level detection fails. Continuously monitor overflow pipe and if overflow is detected, Motor will stop immediately.
- This project is successfully running from past 2 years without any failure.
02
Water tank Automation (Without WiFi)
We have designed this solution especially for regions where Wi-Fi is not available, such as Building/Apartment’s Water Tanks.
- Controls Water tank motor: Turns ON when Upper tank water level is below 60%, Turns OFF when Water level is above 95%. Also checks if we have water left in the underground tank, if there is no water left, motor will NOT turn ON.
- We can also automate the inlet suction motor based on timing and waterflow.
- Prevent Motor dry run: If water supply stops, Motor will stop immediately to prevent dry run of motor.
- This project is successfully running from past 1 years without any failure.
03
Smart Switch Automation
Completed Smart Switching automation for Switch board for 8 switches:
- Attached our 8 switch smart control module to control main board switches, which enabled the user to upgrade their board at minimum cost.
- This helped our user to bring all their old legacy home appliance over wireless control and automation.
- 4 switches, 8 switches, 16 switches board available.
04
Smart LED lightning
We made your sweet home sweeter with led light automation:
- We installed best quality led strips at ceiling to change house environment from party mood to romantic.
- Installed led strip at stair case and automated it to detect human presence near staircase and light up in the dark.
- Installed led strips below your bed to design your bedrooms with mood lights.
05
Multisensor Automation
- We used this product to sense different parameters: Temperature, Humidity, Light sensing, motion sensing. This helped us to automate different legacy home appliances.
- We automated Old Legacy Air-Conditioner,based on temperature sensing, Switch On and Off based on human arrival.
- Based on motion sensor, we were able to control smart lightning,
06
Bathroom Light Automation
- We automated users Bathroom light based on human presence.
- Automatically turns ON light when user enters bathroom and Turns OFF with users exit.
07
Staircase Lights & Motion Sensor Automation
- As user moves staircase lights glows to guide the path in the Dark.
- Automatically turns ON light when user move in the corridor and turns OFF after a wait time with the help of Motion sensor
08
Door sensor Automation
With Door sensor automation, peoples only imagine smart lock system. But for us its not just Smart lock system.
Our Door sensor automation is as follows:
- Switch OFF selective home appliances like Coffee machine, AC, Lights, fan, etc when Door is locked.
- Turn ON appliances, like AC, lights, fan etc on your arrival.
As of now we do not offer any Smart Door lock systems (If you already have it we can integrate it with our controller only if it is integrable).